Accessories

    = Standard
  = Optional
  = Not Applicable
 
 
Accessory944
944WL
955
955WL
988
988WL
DescriptionApplication
Liftmaster 3950 Jackshaft OperatorLiftmaster 3950 Jackshaft Operator   Heavy duty 24v DC motor provides ultra quiet operation, along with variable speed smooth start and stop.For 944 and 955 doors, applications of up to 12 ft height x 12 ft width.
Stainless Steel Slide Latch
(Exterior)
Stainless Steel Slide Latch (Exterior)
   We offer a traditional stainless steel slide latch as an alternative to our Spaceguard latch. The latch provides space for two padlocks, or the Guardian II cylinder lock. (Lock shown in photo, available as additional option)This latch matches the appearance of older Trac-Rite doors and some competitor doors.
Jamb Brush SealJamb Brush Seal   Weather strip fabricated from black polypropylene filament brush in a mill finish aluminum extrusion. Attaches to side jamb.Designed to eliminate air infiltration. Recommended for use in wide-open spaces, dusty weather conditions, and with the insulation accessory.
Guardian II Lock   The Guardian II cylinder lock provides a secure locking mechanism for use with stainless steel slide latches.Fits all stainless steel slide latches on Trac-Rite model 944, 955, and 988 doors.
Header Draft Stop
(Field Installed)
Header Draft Stop (Field Installed)
   4" wide, consists of a 1" rigid PVC® strip and 3" flexible TPE section. Attaches to the header.Designed to seal the top of the door to eliminate air infiltration. Recommended for use in wide-open spaces, dusty weather conditions, and with the insulation accessory.
SpaceGuard Exterior LatchSpaceGuard Exterior Latch   Cast zinc alloy with black nickel finish. Latch slide has magnetic properties for use with security system switches. Designed to accommodate two padlocks up to 7/16" shank. Accommodates Trac-Rite's optional SpaceGuard Cylinder Lock, which features an easy over-lock system. The cylinder lock does not penetrate the door.Provides secure exterior locking capabilities to a single entrance.
Interior LockInterior Lock   12-gauge, zinc-coated steel slide bolt engages a lock strike attached to the side guide. Two locks per door fasten to the bottom assembly and are suitable for padlocking.Recommended where interior access is needed, for example, counter shutter applications.
SpaceGuard Cylinder LockSpaceGuard Cylinder Lock   Removable security cylinder features easy over-lock capability and protection from bolt cutters. Each cylinder lock comes with three coded keys.Provides added security, especially for unfenced areas.
Sill PlateSill Plate   Formed from heavy 20 gauge G90 galvanized steel, the sill plate provides years of protection against wear, standing up to foot and vehicle traffic. Available in sizes from 5’ to 10’ in 1’ increments. Sill plates must be trimmed with a hacksaw or angle grinder to achieve a custom fit. Provides additional protection against water intrusion and wear on the door opening sill. Ideal for structures with wood floors.
Hood
(Available in Iced White only)
   Covers the door nest. Available in Iced White only.Keeps the door nest clean, protects the mechanisms from weather, and is aesthetically pleasing.
Insulation
(Factory Installed)
Insulation (Factory Installed)
   Double bubble foil reflective insulation with an extra layer of polyurethane coating on the front side for durability.Helps maintain desired temperature in heated building applications. Header draft stop and jamb brush seals are recommended with insulated doors.
Narrow Jamb Bracket Plates   Dimensions 5" x 5-5/8"Increases jamb mounting surface width when necessary.
Reverse Rolled Curtain   A reverse rolled door is one that coils above the exterior of the door opening rather than the interior of the building. Click here to see examples: [Reverse Rolled Door Examples]. The link opens a new window, which you may close to return to this page.Use when exterior mounting is necessary due to lack of available head room for interior mounting. A hood may be necessary with this option.
Direct-Drive Chain HoistDirect-Drive Chain Hoist   9-1/2" outside diameter cast iron pocket wheel with zinc-plated steel chain guide. Mounts on a 1" diameter shaft extension fastened to the door axle. Mounts on either side of the door. Chain keeper provided.Pulley system offers easy and convenient opening.
4:1 Reduced-Drive Chain Hoist4:1 Reduced-Drive Chain Hoist   Uses a chain and a two-sprocket arrangement to make the door much easier to lift. Mounts on a 1" diameter shaft extension fastened to the door axle. Mounts on either side of the door. Chain keeper provided.When opening large, heavy doors, this chain hoist fits the bill. With one pull, the door opens 1/4 of a revolution. This allows for controlled easy opening. Additionally, this hoist allows tall doors to open completely with little effort.
8:1 Reduced-Drive Chain Hoist8:1 Reduced-Drive Chain Hoist   Uses a chain and a two-sprocket arrangement to make the door much easier to lift. Mounts on either side of the door. Chain keeper provided.When opening large, heavy doors, this chain hoist fits the bill. With one pull, the door opens 1/8 of a revolution. This allows for controlled easy opening. Additionally, this hoist allows tall doors to open completely with little effort.
Medium-Duty Motor OperatorMedium-Duty Motor Operator   1/2" horsepower, medium-duty operator. Wall mounted, this operator drives a sprocket mounted on the shaft extension connected to the axle.Offers one-touch opening with several accessory options and has remote control capabilities. Ideal for extended operation (up to 12 cycles per hour).
Shaft Extension KitShaft Extension Kit   Shaft extensions are designed to fit the axle. Measures 1" in diameter with a 1/4" keyway.Necessary to install chain hoists or motor operators.