944 Door | 944WL Door | 955 Door | 955WL Door | 988 Door | 988WL Door
RackLock Pallet Racking | Nuspace Hallway System | Portable Storage Containers | Color Options
Accessories | Photo Gallery | Warranty | Maintenance | Safety Notices

Description - Applications - Specifications - Wind Load Ratings - Installation - Order Your Door

Description
The Trac-Rite^® 955 door is designed for light-duty commercial use in everything from farm buildings and warehouses to car washes and auto body shops. Available in custom sizes from 5'W up to 12'W x 3'H up to 12'8"H in 1" increments. Maximum heights vary depending on width. The 955 features a 26-gauge, rigid-rib steel curtain that is durable, attractive, and requires little maintenance. The 955's drums and helical torsion EP³ springs provide solid curtain support and balancing; while the permanently-sealed ball bearings assure smooth operation. Trac-Rite's 955 door is the ideal choice for large door openings and buildings with high eave structures and low door heights. 

Applications
Auto Body Shops
Boat Houses
Car Washes
Cold Storage
Dock Doors
Machine Shops
Fabric Span Structures
Roll-Up Interior Partition Dividers
Post Frame Buildings
Sheds
Warehousing Applications
High Eave Structures with Relatively Low Door Heights

NOTE: Doors should not be used in applications that require fire rated or explosion proof doors. Heavy industrial and complex HVAC System (high negative or positive pressure) applications should also be avoided.

 
Specifications

Design Type	Live axle: door axle rotates in bracket bearing during operation.
Drums	Stamped, continuously welded at the hub. 12" diameter x 1-1/2" wide. 16-gauge, zinc-coated steel. Three drums with doors up to 8' wide, four drums with doors over 8' wide.
EP3 Springs	Helical torsion, oil tempered, and coated to halt corrosion and increase life. One spring for all doors less than 5' high. One spring for doors 7'11" wide and smaller, two springs for doors 8' wide and larger.
Tensioning System Axle	Springs come with a zinc-coated cast steel tension wheel and winding bar for ease of adjusting spring tension. 1-5/16" outside diameter, schedule 80 steel pipe.
Curtain	Roll-formed sections, factory-seamed from 26-gauge, Grade 80 galvanized steel. Siliconized polyester finish in eleven standard colors. Full-length felt tape at each drum.
Bottom Assembly	Zinc-coated steel bottom angle mounted to corrosion-resistant aluminum extrusion with stainless steel bolts. TPE blade astragal also included.
Brackets	12-gauge, cold-formed, zinc-coated steel. Grease-packed ball bearings are factory installed in the bracket.
Guides	16-gauge, zinc-coated, 2-3/4" deep. Featuring polypropylene guide runners to assure smooth operation and prevent steel-on-steel contact.
Interior Lock	12-gauge, zinc-coated steel slide bolt engages a lock strike attached to the side guide. Two locks per door fasten to the bottom assembly and are suitable for padlocking.
Mounting Fasteners	Steel or wood fasteners included.
Steel	Bracket: 1/4" x 1" self-drilling screws Jamb: 1/4" x 1" self-drilling screws
Wood	Bracket: 3/8" x 2-1/2" lag bolt Jamb: 1/4" x 1-1/2" self-drilling screws
Masonry	For masonry openings, mounting clips are sold separately. Masonry anchors are furnished by the Buyer.
Door Stop	12-gauge, zinc-coated, L-shaped door stops. Mounts to guides.
Pull Rope Handle	Molded plastic rope handle with long-lasting rope. Note: Product specifications are subject to change without notice.

Wind Load Ratings
All Trac-Rite door models, both standard and windlock, are put through rigorous wind testing. The testing is witnessed and certified by an independent test lab. Trac-Rite doors are approved for installation in buildings affected by Florida Building Commission regulations concerning wind testing and manufacturing certifications.

955 Door Width       955 Door PSF Rating
         5'0"                            56.0
         6'0"                            42.0
         7'0"                            30.0
         8'0"                            24.0
         9'0"                            20.0
        10'0"                           17.0
        11'0"                           14.0
        12'0"                           12.0


Installation
After reviewing the complete installation instructions, you will find that Trac-Rite 955 doors are easy to install!

Installation Outline

1. Assemble brackets to door nest.
2. Hoist door in place and attach brackets.
3. Attach guides, tension the door, cut bands, and install door stops.
4. Adjust and fasten guides. Install lock assembly and rope.

You're now ready to use your Trac-Rite 955 door! 

Order Your Door
Once you have completed the four preliminary steps for determining your needs, you are ready to order your 955 door.