944 Door | 944WL Door | 955 Door | 955WL Door | 988 Door | 988WL Door
RackLock Pallet Racking | Nuspace Hallway System | Portable Storage Containers | Color Options
Accessories | Photo Gallery | Warranty | Maintenance | Safety Notices

NOTE: Doors should not be used in applications that require fire rated or explosion proof doors. Heavy industrial and complex HVAC System (high negative or positive pressure) applications should also be avoided.


Specifications

Design Type	Dead axle design with torque-tube assembly. Rotates on a fixed axle during operation.
Torque-Tube Assembly	Axle is high-yield structural tubing with 1-5/16" outside diameter. Drums are 12" diameter spiral x 1-1/2" wide, 16-gauge, zinc-coated steel with grease-filled ball bearings mounted in the center of the drum to promote smooth operation. EP3 springs are helical torsion, oil tempered, and coated to halt corrosion and increase life. Axle, drums, and springs are enclosed in a 26-gauge galvanized spiral tube to provide even curtain support.
Curtain	Roll-formed sections, factory seamed from 26-gauge, Grade 80 galvanized steel. Siliconized polyester finish in eleven standard colors. Full-length 2" felt tape for smooth rolling and reduced marring.
Bottom Assembly	Zinc-coated steel bottom angle mounted to corrosion-resistant aluminum extrusion with stainless steel bolts. TPE bulb-style astragal also included.
Brackets	Universal mounting brackets are interchangeable for mounting on the left or right side. 10-gauge, cold-formed, galvanized steel, embossed for added strength.
Saddle with Tensioner	Easily adjustable one-piece saddle accepts 1-5/16" diameter axle. Double cams lock the axle in position and maintain tension on the springs.
Guides	16-gauge, zinc-coated, 2-3/4" deep. Featuring polypropylene guide runners to assure smooth operation and prevent steel-on-steel contact.
Curtain Windlocks	10-gauge, zinc-coated steel, secured to door with two 3/16" rivets.
Windlock Bar	Galvanized 12-gauge with holes for fastening to jamb every four inches. Placed inside the guide.
Chain Hoist	8:1 reduced-drive. Mounts directly to the axle on either the left or right side.
Interior Lock	12-gauge, zinc-coated steel slide bolt engages a lock strike attached to the side guide. Two locks per door fasten to the bottom assembly and are suitable for padlocking.
Mounting Fasteners	Steel or wood fasteners included. For masonry openings, mounting clips and anchoring system are sold separately.
Door Stop	12-gauge, zinc-coated, L-shaped door stops. Mounts to guides.

                      Note: Product specifications are subject to change without notice.


Wind Load Ratings
All Trac-Rite door models, both standard and windlock, are put through rigorous wind testing. The testing is witnessed and certified by an independent test lab. Trac-Rite doors are approved for installation in buildings affected by Florida Building Commission regulations concerning wind testing and manufacturing certifications.

988WL Door Width       988WL Door PSF Rating
          11'0"                                32.0
          12'0"                                29.0
          13'0"                                24.0
          14'0"                                24.0
          15'0"                                21.0
          16'0"                                21.0


Installation
After reviewing the complete installation instructions, you will find that Trac-Rite 988WL doors are easy to install!

Installation Outline

1. Attach door brackets to header.
2. Attach chain hoist and tensioning device.
3. Hoist door in place and attach door to brackets.
4. Attach guides, tension the door, cut bands, and install door stops. 

You're now ready to use your Trac-Rite 988WL door! 


Order Your Door
Once you have completed the four preliminary steps for determining your needs, contact us to order your 988WL door.